Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Fireplace Repair for Sun Valley Homeowners
A fireplace that smokes into the room, won’t light, or smells of soot when it’s cold outside usually has a specific, findable cause. Our fireplace repair in Sun Valley starts by diagnosing that cause with a camera inspection, then telling you plainly what it takes to fix it – and what can safely wait. Our technicians have up to 13 years of experience, and we work with the professional-trade materials chimney specialists specify, like HeatShield ceramic resurfacing and DuraFlex liner systems, rather than retail-grade parts. Same-day service is often available; call (855) 710-2744 and we’ll book a visit. Every repair quote is a written, flat-price estimate agreed before any work begins.
What Our Fireplace Repair Service Includes
Fireplace problems live in different parts of the system, from the gas valve at the firebox to the flue liner above it. We handle six common repair categories, and each starts with an inspection so the fix matches the actual fault.
Gas Fireplace Repair
Gas fireplaces fail in predictable ways: the burner won’t stay lit, the flame burns weak or uneven, or you smell gas near the unit. Those symptoms point to the pilot assembly, thermocouple, gas valve, or a blocked burner port, and they need a trained technician because gas work carries real risk. We diagnose the fault, replace the failed component, and check the burner and venting before we call the job done. If you ever smell gas strongly, leave the house and call your gas utility first; then call us for the repair.

Wood Burning Fireplace Repair
Wood fireplaces develop problems that show up as smoke spillage, a fire that’s hard to start, or a firebox that’s cracked and crumbling. Common causes are a damaged damper, a smoke shelf packed with creosote, or deteriorated mortar joints in the firebox. We inspect the full firebox and flue, then repair the damaged masonry or hardware so the fireplace drafts and burns the way it should. If the flue liner is also failing, we’ll tell you, and show you the camera footage.

Fireplace Insert Service
An insert sits inside the firebox and needs its own service, separate from the fireplace around it: the surround, the blower, the gaskets, and the liner connection to the flue. If your insert rattles, heats poorly, or the blower has stopped, wear in those components is usually the reason. We service inserts of all common makes, check the connection to the flue liner, and replace worn gaskets and blower parts. A loose or degraded liner connection is worth catching early, before it becomes a flue problem.

Damper Repair
The damper is the metal door above the firebox that controls draft, and when it sticks open or won’t open at all, you get either a smoky room or a drafty one. Warped, rusted, or disconnected dampers are common in older fireplaces, and a damper stuck open lets heated air and pests straight up the flue. We repair or replace the damper assembly and confirm it seals and opens smoothly before we leave. A damper that seals properly is one of the simplest efficiency gains a fireplace can get.
Firebox Repair
The firebox takes the direct heat, so cracked brick, crumbling mortar, and spalled firebrick are the usual failures. Those gaps let heat and moisture into the masonry behind the firebox, which is where a small repair turns into a structural one if it’s left alone. We rebuild damaged firebox panels and joints with heat-rated materials suited to the fireplace, using HeatShield ceramic resurfacing where the structure allows a repair rather than a full rebuild. You get a firebox that holds heat where it belongs.
Pilot Light Repair
A pilot that won’t stay lit is one of the most frequent gas fireplace complaints, and it’s usually the thermocouple, thermopile, or a dirty pilot orifice. Those parts sense whether the flame is present and shut off the gas if it isn’t, so a weak pilot isn’t something to ignore. We test the safety circuit, clean or replace the failing component, and confirm the pilot holds a steady flame. If the pilot keeps going out, that’s a sign to have it checked rather than relit repeatedly.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Fireplace Repair
We work with brands the chimney trade specifies, and that matters when a repair relies on a component that has to fit and last. HeatShield is a ceramic resurfacing system designed to restore a deteriorated flue liner without a full relining, and we use it where the flue structure allows that repair path instead of a replacement. We also fit Gelco and Famco chimney caps, which are purpose-built covers that keep water, debris, and animals out of the flue – a small component that prevents a lot of damage.
We source components from Copperfield and Olympia Chimney, two of the most recognized professional chimney supply distributors in the trade, so the parts we install are the ones chimney professionals specify. That’s not the same as what’s on a shelf at the hardware store. Whether you have a HeatShield-resurfaced flue, a Gelco or Famco cap, or any other make of fireplace, insert, or damper, we can help.
Signs You Need Fireplace Repair Right Now
Some fireplace symptoms can wait for a scheduled visit. Others point to a safety issue you shouldn’t put off. Here are the ones worth acting on:
- Smoke spilling into the room. Smoke that rolls out instead of going up the flue usually means a blocked flue, a damper problem, or a draft issue. It’s uncomfortable and it’s also a sign the exhaust path isn’t working, so get it checked.
- A strong gas smell near the fireplace. Any persistent gas odor means a leak and should be treated as urgent. Leave the house, call your gas utility, and then call us to repair the appliance once it’s safe.
- Cracked firebox brick or crumbled mortar. Gaps in the firebox let heat reach the masonry behind it, which can spread damage into the structure. A repair now is usually smaller than the one it prevents.
- A pilot that won’t stay lit. A pilot that goes out repeatedly points to a failing thermocouple or thermopile, which is the safety device that shuts off gas when the flame isn’t there. That device needs to work.
- Water or rust inside the firebox. Moisture getting in usually means a failing cap or crown above. Rust on the damper or firebox parts is a sign water has been finding its way in for a while.
Our Fireplace Repair Process – Step by Step
We don’t guess at a repair. Each job moves through five steps, and you see the evidence at each one.
- 1
Book and confirm. Call (855) 710-2744 and we book a visit, with same-day service often available. We agree a flat-price sweep up front so the diagnostic work has a known cost before anyone arrives.
- 2
Inspect the whole system. We look at the fireplace from firebox to crown: the firebox, damper, insert connection, flue liner, and cap and crown above. A camera inspection lets us see the flue interior rather than assume what’s happening in it.
- 3
Show you what we found. You get a photo report of the actual condition, with the problem spots pointed out. If a repair is needed, you see why; if work can safely wait, we say so.
- 4
Quote the repair in writing. We set a flat price for the specific repair, agreed before any work starts. Nothing is added without your approval, and there are no surprises on the invoice.
- 5
Do the repair and verify it. The technician completes the repair with the proper materials and then checks that the fireplace, damper, and flue work as they should. A satisfaction guarantee covers the work.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Repair Cost in Sun Valley?
Fireplace repair in Sun Valley typically runs $150 to $600 for most common fixes, and the exact figure depends on which component failed and how much access the repair needs. A straightforward damper adjustment or pilot assembly replacement usually sits at the low end; firebox rebuilding or flue resurfacing with HeatShield moves toward the higher end. An insert service or blower replacement generally falls in between.
What affects the price: the part that failed, whether masonry repair is involved, and the condition of the flue liner above the fireplace. A damaged liner is often found during inspection, and it changes the scope – which is exactly why we check it first. The written estimate sets the final price; the ranges here are typical, not a quote for your specific fireplace.
To avoid overpaying, get the diagnosis in writing with the camera evidence attached, and don’t authorize work beyond what the photos show. Every estimate we give is free and no-obligation, and we’ll tell you plainly when a repair can wait. Call (855) 710-2744 for an exact quote.
Fireplace Repair Near Sun Valley – Our Service Area
We provide fireplace repair across the east San Fernando Valley and the surrounding foothill communities. Alongside Sun Valley, we serve North Hollywood, Burbank, Sunland, Tujunga, Valley Village, Panorama City, Toluca Lake, Studio City, Van Nuys, San Fernando, and Sherman Oaks. If you’re unsure whether your address is in range, call and we’ll confirm when we book. We also serve nearby areas with dedicated pages, such as fireplace repair for North Hollywood homeowners and fireplace repair in Burbank.
Serving Sun Valley, CA – Our Local Coverage Area
We serve Sun Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fireplace Repair in Sun Valley
Fireplace repair is fixing the parts of a fireplace that have failed – the damper, firebox, pilot assembly, insert components, or the flue liner above – so the fireplace burns and vents correctly. It’s different from a routine cleaning, which removes creosote and soot, though the two often go together after an inspection turns up a problem. Our repair work covers the full system from the firebox to the crown. Call (855) 710-2744 for an exact quote – estimates are free.
Most common repairs, like a damper fix, pilot assembly replacement, or gasket and blower service on an insert, are completed in a single visit of about one to three hours. Firebox rebuilding or flue resurfacing can take longer because the materials need to cure between steps. We’ll give you a realistic time frame with the written estimate so you can plan around it. Call (855) 710-2744 to book a visit and get a time estimate for your repair.
Typical fireplace repairs in Sun Valley run $150 to $600, with the final figure set by the written estimate for your specific job. Simple component replacements sit at the low end; firebox rebuilding and flue resurfacing with HeatShield land toward the high end. The estimate is free, and we show you the camera evidence behind any recommended repair before you approve it. Call (855) 710-2744 for an exact quote – estimates are free.
Yes – we use HeatShield ceramic resurfacing for flue repairs where the structure allows it, and we install Gelco and Famco chimney caps as part of our cap and crown work. We also source components from Copperfield and Olympia Chimney. Whether your fireplace or flue carries one of these or another make entirely, we can diagnose and repair it. Call (855) 710-2744 to schedule.
Same-day service is often available when you call earlier in the day, and we’ll tell you honestly when the next opening is. We answer 24/7 on the phone. Fast dispatch from 7am to 7pm, Sunday through Friday; we’re closed on Saturday, and a call outside dispatch hours is booked into the next opening. Call (855) 710-2744.
Our repair work is backed by a satisfaction guarantee: if something we fixed isn’t working the way it should, we come back and make it right. We’ll explain what the guarantee covers for your specific repair when we hand over the written estimate, so it’s clear before the job starts. Call (855) 710-2744 with any questions about coverage.
Clear the hearth area and the floor in front of the fireplace, and move anything breakable away from the surround. If the fireplace is gas, make sure we can reach the gas shutoff and that the pilot has been off; if it’s wood, remove any remaining ash and unburned wood. Tell us at booking what symptoms you’re seeing so the technician brings the right parts. Call (855) 710-2744 to book.
Schedule Your Fireplace Repair Service in Sun Valley Today
If your fireplace won’t light, smokes, or just hasn’t worked right in a while, get it looked at with a camera inspection and a written quote you can trust. Call (855) 710-2744. We answer 24/7, and fast dispatch runs from 8am to 7pm, Sunday through Friday. Estimates are free and no-obligation, and you only approve the repair once you’ve seen the evidence. From the fireplace and chimney work we handle to a simple damper fix, the whole system is covered.
Written by the team at Chimney Sweep Sun Valley.