Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Cap & Crown for Sun Valley Homeowners
Water is the quiet enemy of every chimney in Sun Valley. It gets in at the top, where the cap sits and the crown meets the masonry, then works its way down through the flue and into the framing before you ever see a stain on the ceiling. A missing or rusted-through cap and a cracked crown are the two most common entry points we find, and they’re also the two cheapest problems to solve before they turn into liner or structural work.
Our technicians have up to 13 years of experience with cap and crown work, and they specify the same materials professional chimney trades use rather than what’s sitting on a hardware store shelf. We install Gelco and Famco caps, form and coat crowns, and fit multi-flue and custom covers when a standard size won’t do the job. Same-day appointments are often possible in Sun Valley, and the estimate is free. Call (855) 710-2744 to book one.
What Our Chimney Cap & Crown Service Includes
Caps and crowns are one service line because they fail together. The cap keeps rain, birds and debris out of the flue; the crown sheds water off the top of the masonry itself. When either one gives way, the other usually isn’t far behind. Here’s what each part of the work involves.
Cap Installation
A chimney cap is the cover that sits over the flue opening, usually on a mesh-sided frame that sparks and animals can’t get through. You need one if the flue is open to the sky, if birds or squirrels have found their way in, or if a previous cap has rusted or blown loose. We fit purpose-built Gelco and Famco caps sized to the actual flue, sealed and anchored so wind doesn’t lift them.

Cap Replacement
Replacement is for caps that are already there but past their useful life: rusted mesh, a bent frame, a lid that no longer sits flush, or a cap that was the wrong size to begin with. A failing cap stops doing its job quietly, which is why we check it on every inspection. We pull the old unit, check the flue tile and crown underneath for damage the failed cap may have let in, and install a correctly sized replacement.

Crown Repair
The crown is the concrete or mortar slab at the very top of the chimney that slopes water away from the flue. Hairline cracks are normal as masonry moves, but open cracks let water soak into the structure above the roofline. We repair crowns by cutting out the failed section and rebuilding it with a proper slope, or by resurfacing where the damage is surface-level and the crown is still sound underneath.

Crown Coating
Crown coating is a protective membrane applied over a crown that’s cracked but structurally intact. It’s the right call when the crown is sound but porous, which is common on older masonry that has weathered many dry summers. We clean and prep the surface first, because a coating over dirt or loose mortar won’t bond, then apply a flexible coating that moves with the crown instead of cracking away from it.
Multi-Flue Cap
A multi-flue cap covers two or more flue openings under a single housing, which is what most larger Sun Valley homes with a central chimney actually need. Individual caps on each flue can look cluttered and let water sit between them, while a single unit sheds it all cleanly. We measure the full flue arrangement and build or specify a top-mounted or side-mounted multi-flue cap that fits the footprint.
Custom Cap
Custom caps are for chimneys that don’t match standard dimensions: oversized flues, unusual shapes, or a homeowner who wants the cap to match the house rather than just cover the hole. We take the flue measurements on site and have the cap fabricated to fit, using Copperfield and Olympia Chimney components where the configuration calls for them. It takes a little longer than an off-the-shelf fit, but it’s the only way to get a proper seal on a non-standard top.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Cap & Crown
We work with HeatShield for crown and flue resurfacing, because the ceramic system is designed to bond to prepared masonry and restore a surface rather than just paint over it. On the cap side, we install Gelco and Famco units, both purpose-built covers rather than generically stamped sheet metal, and source components through Copperfield and Olympia Chimney when a job calls for a specific fit. Our technicians know where each of these products wears first, which is usually the mesh on a cap and the slope edge on a crown.
We don’t claim to be a dealer for any of these lines, and we won’t tell you a brand is the only option. What we will do is explain why a particular cap or coating suits your chimney and what the alternatives would cost. Whether you have an existing Gelco cap that’s rusted out, a HeatShield-treated crown that needs a recoat, or a chimney with no cap at all, we can help.
Signs You Need Chimney Cap & Crown Right Now
- Water staining on the ceiling or chimney breast. Brown rings or damp patches near the fireplace usually mean water is getting in at the top and traveling down. The cap and crown are the first places we check, because fixing the source is cheaper than repairing the damage it causes.
- A cracked or crumbly crown. If you can see cracks wider than a hairline from the ground, or mortar flaking off the top slab, the crown is no longer shedding water. Small cracks get sealed; open ones get rebuilt before the masonry below takes on water.
- No cap, or a cap that’s rusted through. An open flue lets rain straight onto the liner and gives birds and squirrels an easy entry. A rusted mesh cap has usually lost its spark-arresting job too, so it’s worth replacing rather than patching.
- Debris or animal activity in the firebox. Twigs, nesting material or droppings in the firebox point to a cap that’s missing or damaged. It’s also a sign the flue should be swept before the next fire, since nests can block the draft.
- Rust streaks on the chimney exterior. Rust running down the outside of the masonry usually traces back to a corroded cap or flashing. It’s cosmetic early on, but the corrosion behind it only gets worse with each wet season.
Our Chimney Cap & Crown Process – Step by Step
- 1
We look before we quote. A technician goes up on the roof, photographs the crown, cap and flue from several angles, and checks the flashing where the chimney meets the roof. You see the photos before we recommend anything, so you know exactly what condition your chimney is in.
- 2
We explain the options in plain terms. Some crowns can be coated, some need a partial rebuild, and some are fine for another few seasons. We lay out what each path costs and what it buys you, and we say plainly when work can safely wait.
- 3
We agree the price before any work starts. The written estimate sets the final price, so there’s no surprise when the job is done. If the scope changes once we’re on the roof, we stop and talk to you first.
- 4
We prepare the surface properly. Whether it’s a cap install or a crown repair, the prep is what makes it last. We clean and cut back failed material, check the flue tile underneath, and make sure the new surface has something sound to bond to.
- 5
We install, photograph and clean up. The new cap or crown goes on, we photograph the finished work for your records, and we clear the roof and yard of debris. You get a clear picture of what’s up there, not just a handshake at the door.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Sun Valley?
A typical chimney cap install in Sun Valley runs $275 – $650 depending on the flue size and whether it’s a single or multi-flue unit. Crown coating usually lands in the $350 – $700 range for an accessible roof, and a partial crown rebuild is more, in the $700 – $1,400 range once mortar, forming and the slope work are included. A custom cap built to a non-standard flue sits at the higher end of the cap range, sometimes above it. These are typical estimates, not fixed prices.
What moves the number: the size and number of flues, how accessible the roof is, whether the existing crown needs cutting back or just coating, and whether the flue tile underneath the cap has suffered water damage. A steep or hard-to-reach roof adds labor time. If an inspection turns up a deteriorating flue liner, that’s separate repair work and we’ll quote it clearly rather than fold it into the cap price.
To avoid overpaying, ask for photos of the crown and cap before anyone quotes you, and ask whether coating or rebuilding is the honest call. A written estimate should list the product being installed, the prep work, and what happens if they find something different up top. Our estimates are free and include a camera inspection with a photo report.
Chimney Cap & Crown Near Sun Valley – Our Service Area
We handle cap and crown work across Sun Valley and the surrounding valley communities, including North Hollywood, Burbank, Sunland, Tujunga, Panorama City, Van Nuys, Studio City, Sherman Oaks, Toluca Lake, Valley Village, San Fernando and beyond. Close-in addresses typically get a technician out fast, with dispatch running 7am to 7pm, Sunday through Friday. If you’re nearby and comparing options, our chimney cap & crown page covers the neighboring area, and our main Chimney Sweep Sun Valley page has the full service picture.
Serving Sun Valley, CA – Our Local Coverage Area
We serve Sun Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Cap & Crown in Sun Valley
A chimney cap is the cover over the flue opening, usually with mesh sides, that keeps rain, animals and debris out. The crown is the sloped slab of concrete or mortar at the very top of the chimney that sheds water away from the flue and the masonry below. Together they are the chimney’s first defense against water intrusion, which is why we treat them as one service line.
Most cap installations take under two hours, and crown coating is usually a single visit. A partial crown rebuild takes longer, often most of a day once the mortar has to set and the new slope is formed. We’ll give you a realistic time window when we quote, based on what we find on the roof.
Typical estimates run $275 – $650 for a cap install and $350 – $700 for crown coating, with partial crown rebuilds in the $700 – $1,400 range. The final price depends on flue size, roof access and how much prep the surface needs. Call (855) 710-2744 for an exact quote. Estimates are free.
Yes. We install Gelco and Famco caps and also replace or reseat existing ones, including caps that were the wrong size from the start. We also source components through Copperfield and Olympia Chimney when a job needs a specific fit. If your cap is another make entirely, we can still assess it and recommend the right replacement.
Often, yes. Same-day appointments are frequently available depending on the schedule and the scope of the job. Call (855) 710-2744. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
We stand behind the installation and will come back to look at anything that isn’t right. The specific coverage depends on the product and the repair, and we explain it in writing in the estimate, so you know what’s covered before work starts. We don’t quote a warranty number we haven’t confirmed.
Clear access to the fireplace and the roofline if possible, and let us know if there’s a gate code or a dog in the yard. You don’t need to move furniture or do anything special. We bring the camera, the ladder and the materials; you just need to be there or arrange access.
Schedule Your Chimney Cap & Crown Service in Sun Valley Today
A cap and a crown are the cheapest insurance your chimney has. If yours is cracked, missing or rusted through, call (855) 710-2744 to book a free estimate in Sun Valley. A technician will inspect the top, photograph what’s there and quote the work in writing. We answer 24/7, fast dispatch runs 7am to 7pm, Sunday through Friday, and there’s no obligation once you have the number.
Written by the team at Chimney Sweep Sun Valley.