Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across San Fernando
If your fireplace is smoking into the room, your damper won’t open, or your pilot light keeps dying, we can help. We’re a dedicated chimney and fireplace specialist, not a general handyman who added a brush to the truck, and we know San Fernando’s older fireplace stock up close: the postwar stucco homes near the historic downtown, the original brick and clay-tile stacks that have gone years without real attention. When you call, our firefighters-adjacent craft kicks in: we send a pro who reads the whole system, firebox to crown, and shows you what’s wrong on camera before recommending anything. Call (855) 710-2744. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why San Fernando Homeowners Call Chimney Sweep Sun Valley for Fireplace Repair
We’ve built our name in San Fernando on straight answers, not scare tactics. The industry’s worst upping happens on exactly the older chimneys this city is full of, and we work the opposite way: a camera inspection you can watch over our shoulder, a written explanation of what we found, and a clear statement of when a repair can safely wait. Our technicians have up to 13 years of experience reading clay-tile flues, rusted dampers, and spalled fireboxes, and they know the difference between a problem that needs action now and one that only needs watching.
That local knowledge matters here. San Fernando’s housing is largely postwar single-family stucco, built from the 1940s through the 1970s, with original masonry fireplaces and chimneys. Many still have their original clay-tile liners, heated and cooled through decades of use and disuse. New infill homes and apartments around San Fernando rarely have wood-burning fireplaces at all, which means when a real fireplace problem shows up, it’s almost always in older stock. We serve San Fernando homeowners with that reality in mind, and we’re happy to talk through what your stack likely has before anyone sets foot inside. Call (855) 710-2744 for a free estimate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in San Fernando
A fireplace is a small assembly of systems that all have to work together: the firebox, the damper, the flue, the cap and crown. When one fails, the whole thing misbehaves. Here’s how we handle the repair work most San Fernando homes actually need.
Gas Fireplace Repair
Gas fireplaces in San Fernando’s newer infill and apartment stock are common, but the repair issues are their own animal: pilot assemblies that won’t stay lit, thermocouples going soft, clogged burner ports, and gas smell complaints. We diagnose the whole gas path and repair the failed component. Gas line and burner work is not a homeowner job, so we handle it with the care it demands and never touch a live gas connection without the right procedure. If you smell gas, shut the valve and call us or your gas utility first.
Wood Burning Fireplace Repair
Wood-burning fireplaces in San Fernando’s older homes take the hardest wear. Years of seasonal burning, then long idle stretches, then a single heavy fire season, will crack mortar joints, smoke-stain the surround, and glaze the firebox. We repair firebox brick and mortar, rebuild fireback panels, and address the smoke problems that come from a firebox or flue that has shifted out of shape. Nothing gets replaced until we’ve seen the failure on camera.
Fireplace Insert Service
Inserts are popular in San Fernando precisely because they make an old masonry fireplace usable without opening up the chimney. We service and repair insert installations, including flue connections that were never done properly, blower and fan failures, and refractory panels that have cracked. If you’re considering an insert, we’ll tell you honestly whether your existing flue can handle one, and we install DuraFlex liner systems when the connection needs proper relining rather than a workaround.
Damper Repair
The damper is the single most common repair we make in San Fernando, and it’s the one that causes the most smoke-in-the-room calls. A damper rusted open lets cold air and animals down the flue; one rusted shut means you can’t use the fireplace at all. We repair or replace damper assemblies, and we also handle the firebox repairs that a stuck damper usually accompanies.

Trusted Brands We Service in San Fernando
We work with the same professional-trade materials chimney professionals specify, not what’s on the shelf at the hardware store. For flue repair, HeatShield ceramic resurfacing restores a deteriorated clay-tile liner without a full relining, saving time and cost when the structure allows it. When a full reline is the right call, we install DuraFlex flexible liner systems, the professional standard for older and offset flues. For caps and dampers, we source from Olympia Chimney and Gelco, two of the most recognized names in the trade. We don’t stock parts on a truck, so we specify what your chimney actually needs and get it ordered quickly.
See the difference
Before
After
Before
After
Before
AfterCommon Fireplace Repair Problems We See in San Fernando Homes
- Cracked clay-tile liners. San Fernando’s postwar flues have often never been relined, and heat cycling from occasional heavy fires after long idle periods cracks the tiles. Once cracked, creosote and moisture can seep into the surrounding masonry, which is why the camera inspection has to come before any repair decision.
- Rusted damper assemblies. Disuse and the valley’s occasional moisture leave dampers rusted open or shut. A damper stuck open drafts your home and lets wildlife in; stuck shut, it makes the fireplace a display piece. Both are straightforward repairs once we’ve confirmed what’s failing.
- Spalling firebox mortar and loosened crown flashing. Dry Santa Ana winds and summer heat stress masonry crowns and flashing, and cracked mortar in the firebox lets water into places it shouldn’t be. Left alone, cracked crowns and flashing are the beginning of expensive structural work, which is why caps and crowns get our attention early.
- Glazed third-degree creosote. Many San Fernando households burn scrap wood and citrus trimmings from backyard trees, which produces sticky, fast-glazing creosote a routine brush can’t remove. That’s when the occasional heavy-burn call comes in after a cold snap, and it’s the reason a brush-and-run sweep isn’t enough on an older flue.
Pricing for Fireplace Repair in San Fernando, CA
Here’s what fireplace repair typically runs in San Fernando, so you have a real number before we arrive. A damper repair or replacement usually runs $150-$400. Firebox repair and mortar rebuilding generally runs $400-$900, depending on how many brick and joint sections are involved. Insert service and connection work typically runs $250-$600. A HeatShield liner resurfacing, when the clay tile can be restored rather than replaced, usually runs $1,200-$2,500; a full DuraFlex reline is a larger job and priced after inspection. These are typical estimates, not quotes: the written estimate we give you sets the final price, and the estimate itself is free. What moves the number is access to the firebox, how much masonry has degraded, and whether the flue can be repaired or must be relined. Call (855) 710-2744 for a free estimate.
We Also Serve Cities Near San Fernando
San Fernando sits in the middle of the valley’s older neighborhoods, and we work the surrounding towns on the same schedule. If you’re in Sylmar up the 5, or across in Panorama City, or down the road in Sun Valley, or out toward Sunland, we can schedule fireplace repair and our fireplace repair service for those addresses too. We serve all of San Fernando as well, and the surrounding blocks are just a short call away.
Serving San Fernando, CA – Our Local Coverage Area
We serve San Fernando and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in San Fernando
Yes. A camera inspection is not optional on a 1950s clay-tile flue, because the tiles crack from the inside where you can’t see them. We run a Level 2 inspection with a camera, show you the cracked tile or damaged joint on screen, and only then talk about repair options. Nothing gets recommended without evidence you can see for yourself. Call (855) 710-2744 for a free estimate.
Third-degree creosote is a glazed, hardened layer that a standard sweep brush cannot remove. It matters in San Fernando because a lot of locals burn scrap wood and citrus trimmings, which produce it faster than clean, seasoned firewood, and the glaze can sit for years on a flue that only sees a few fires a winter. Glazed creosote is a chimney-fire concern, which is why we inspect for it and treat it as a repair, not a sweeping job. Call (855) 710-2744 for a free estimate.
The damper is simply the part that fails first in a fireplace used only a handful of nights each winter. Rusted open or shut from disuse, it causes smoke spillage and draft problems long before the flue itself is damaged. We repair or replace dampers and fix the firebox conditions that go with them. Call (855) 710-2744 for a free estimate.
The hot, dry summers and dry Santa Ana winds are hard on masonry, cracking crowns and loosening the flashing seal around the chimney. That’s the real driver of water intrusion in San Fernando’s older stacks, more than any winter weather. We inspect the crown and flashing as part of every repair visit and install Gelco or Famco caps when the top needs protection. Call (855) 710-2744 for a free estimate.
An insert can be a good fit for an older San Fernando masonry fireplace if the flue is sound or can be relined, and we install DuraFlex liner systems for that connection. We also source insert and cap components through Olympia Chimney and Gelco, both professional-trade names. A camera inspection tells us whether your stack is insert-ready before you commit. Call (855) 710-2744 for a free estimate.
Written by the team at Chimney Sweep Sun Valley.