Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Sun Valley?
Chimney liner work in Sun Valley typically runs $2,400 to $6,800 for a full stainless flexible reline, while a partial HeatShield ceramic resurfacing often lands between $1,200 and $2,600 when the existing liner still has good structure. A structural rebuild at the crown, chimney shoulders or above-roofline masonry is the bigger line item, generally $4,500 to $14,000 depending on how much of the stack comes down. Those ranges are estimates for the Sun Valley market; the written estimate we give you after an inspection sets the final price.
We handle the whole system from the firebox to the crown, so you don’t get handed off between a sweep and a mason. Call (855) 710-2744 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the numbers break down by job type. Every figure is a typical estimated range, not a fixed quote. The inspection decides which of these your flue actually needs.
| Job | Typical Estimated Range | What It Covers |
|---|---|---|
| Level 2 inspection (camera) | $250 – $550 | Video scan of the flue, joints, offset and cap; the basis for any reline quote |
| HeatShield flue resurfacing | $1,200 – $2,600 | Ceramic repair of a deteriorated liner that still has sound structure |
| DuraFlex stainless flexible reline (single-story) | $2,400 – $4,200 | New insulated liner, top plate, cap and connections at the appliance |
| DuraFlex reline (two-story or offset flue) | $4,000 – $6,800 | Longer run, offset sweep, more scaffold or roof access time |
| Crown rebuild | $850 – $2,200 | Removing a cracked crown, forming a new overhang and sealing the joint |
| Chimney cap (Gelco or Famco) | $300 – $750 | Purpose-built stainless or copper cap sized to the flue |
| Above-roofline masonry rebuild | $4,500 – $14,000 | Rebuilding the stack from the roof line up, new flue tile, crown and cap |
| Firebox and damper repair | $600 – $3,200 | Firebrick, mortar joints, damper and smoke chamber work on the fireplace side |
What pushes a job toward the top of a range: a long or offset flue that needs a swept flexible liner instead of a straight run, masonry that’s spalling and has to come down before anything new goes in, and roofs that need more access setup. What keeps it lower: catching the liner while it still has structure so HeatShield can restore it instead of a full reline, and a crown that can be rebuilt before water gets into the stack. A cap and crown installed early is the cheapest money on this list – water getting past a cracked crown is what turns a $1,000 job into a masonry rebuild.
What Affects Chimney Liner & Rebuild Pricing in Sun Valley
Sun Valley’s housing stock and its climate both shape what a chimney job costs here. Most of the homes around the neighborhood are older, single-story stucco and frame houses with original masonry chimneys, and a lot of them have flues that were built for wood and have since had a gas appliance or insert tied in. That history changes the scope.
- Flue condition and liner type. A cracked clay tile liner with gaps at the joints needs a full reline. A liner that’s deteriorated on the surface but still structurally sound can often be restored with HeatShield ceramic resurfacing, which is the difference between a $2,600 job and a $6,000 one.
- Offset flues and flue length. A flue with a jog in it takes a flexible DuraFlex liner and more time to feed than a straight run. Two-story stacks in Sun Valley run longer than single-story ones, and the liner is priced by the foot.
- Crown and flashing condition. The San Fernando Valley’s dry summers and the occasional heavy winter rain put real stress on a masonry crown. A crown that’s cracked and letting water in is the most common reason a chimney rebuild gets quoted in Sun Valley at all.
- Roof access and pitch. Steep or complex roofs slow the access setup, and that time is part of the estimate. A straightforward gable roof keeps the labor line down.
- Masonry damage above the roof line. Spalling brick, eroded mortar joints and a leaning stack all add to a rebuild. Where the damage stops decides where the rebuild stops.
- Fireplace-side work. A damaged firebox, a stuck damper or a smoke chamber that needs parging adds to the total. Since we handle fireplace and chimney repair under one company, those line items come on one estimate instead of two separate trades.
We work with the same materials professional chimney technicians specify – DuraFlex, HeatShield, Gelco, Famco, Olympia Chimney and Copperfield – not what’s on the shelf at the hardware store. That matters on a liner job, because the liner is the part you can’t see and the part that has to last.
How to Save on Chimney Liner & Rebuild
The single biggest saving on this kind of work is finding out what your flue actually needs before anybody quotes a full rebuild. Here’s how to keep the number down without cutting into the parts that matter.
- Get a camera inspection first. A Level 2 inspection tells you whether the liner needs a full reline or can be restored. Skipping it and going straight to a reline quote is how homeowners pay for work they didn’t need.
- Ask about HeatShield before you agree to a reline. HeatShield lets us restore a damaged flue liner without full relining when the structure allows it, which saves both time and cost. It isn’t right for every flue, but it should be on the table.
- Fix the crown before it becomes a rebuild. A crown rebuild runs a fraction of a masonry rebuild. Water is what drives the big numbers on this page, so stopping it early is the cheapest repair you’ll make.
- Put a proper cap on. A Gelco or Famco cap keeps rain, debris and animals out of the flue and costs far less than the liner damage it prevents.
- Bundle the work into one visit. If the crown, cap and liner all need attention, doing them on one job means one access setup and one estimate instead of three separate calls.
For more on how a reline fits into the bigger picture, see our page on chimney liner & rebuild. If you’re starting from the top, Chimney Sweep Sun Valley is where the inspection and sweeping side begins. Estimates are free, so call (855) 710-2744 and we’ll tell you plainly what your flue needs.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney reline cost in Sun Valley?
A full stainless flexible reline in Sun Valley typically runs $2,400 to $6,800, with most single-story jobs landing in the $2,400 to $4,200 range and two-story or offset flues climbing toward $6,800. The written estimate after inspection sets the final price. Call (855) 710-2744 for a free quote.
Is it cheaper to repair a liner or replace it?
Repair is almost always cheaper when the liner’s structure is still sound – HeatShield resurfacing runs $1,200 to $2,600 versus $2,400 to $6,800 for a full reline. Once the clay tile is cracked through or the joints are wide open, a reline is the correct fix and a repair won’t hold. An inspection is what tells you which side of that line you’re on. Call (855) 710-2744 to find out.
How much does a chimney rebuild cost in Sun Valley?
A crown rebuild typically costs $850 to $2,200, while rebuilding the masonry stack above the roof line runs $4,500 to $14,000 depending on how far the damage goes. Most rebuilds here start with a cracked crown that let water into the brick. Call (855) 710-2744 for a free estimate on your stack.
Can you come today?
Same-day service is often possible – call (855) 710-2744 and we’ll get you on the schedule. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Inspections and estimates are free.
Do I need a liner for a gas fireplace or insert?
Yes, in most cases – a gas insert or appliance needs a properly sized liner rated for that fuel, and an oversized flue can’t vent it correctly. A new liner for a single appliance typically runs $1,800 to $3,800 depending on flue length and whether it needs insulation. Call (855) 710-2744 and we’ll check your setup.
Why does a chimney cap cost extra on a rebuild?
A cap runs $300 to $750 on its own and is priced as a separate line item even when we’re already on the roof, because it’s a distinct piece of hardware chosen for your flue size and fuel type. It’s the cheapest defense against water and debris getting in. Call (855) 710-2744 for a free estimate that itemizes it.
Can I see what’s wrong with my liner before I commit?
Yes – a Level 2 camera inspection, typically $250 to $550, shows you the inside of the flue and the basis for the quote. We walk you through what the camera found so you understand which repair the flue actually needs. Call (855) 710-2744 to book one.
Our technicians have up to 13 years of experience on liners, rebuilds, caps and fireplace repair, and we cover the full system from the firebox to the crown. Call (855) 710-2744 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Sun Valley.
Pricing reflects the Sun Valley market as of 2026. Chimney Sweep Sun Valley offers free estimates – call (855) 710-2744.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Kurt Bennett"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Danielle Parker"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Rachel Anderson