Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in North Hollywood, CA
We provide independent Gelco service across North Hollywood, and the one thing that sets our Gelco work apart here is plain: we know how Gelco caps and dampers fail on 90-year-old NoHo masonry, not just on a clean new flue top. We’re an independent shop. We’re not affiliated with, authorized by, or a dealer for Gelco, and we say so up front. What we bring is hands-on familiarity with Gelco chimney components and the local trade knowledge to match them to what North Hollywood actually has under the stucco. Call (855) 710-2744. We answer 24/7, with fast dispatch from 7am to 7pm.
Why North Hollywood Residents Choose Us for Gelco Service
Gelco parts come through our work the way they come through most chimney professionals in the San Fernando Valley: as components we install and service routinely, not as a brand we pledge allegiance to. That independence is the point. We can look at a failed Galvanized cap, a pulled mounting leg, or a seized top-mount damper and tell you what actually went wrong and what fits next. We’re not selling a factory line.
Our technicians have up to 13 years of experience, and a good share of it has been on the kind of masonry you find across North Hollywood: original brick fireplaces, clay-tile flues, irregular crowns that predate anything sold on a shelf today. We spec parts that match the flue count and the actual dimensions. A generic cap that “looks about right” is how you get the leak you were trying to prevent.
From the firebox to the crown, we handle the whole system. Sweeping, inspection, cap and crown, fireplace repair, and chimney repair all sit with us, so a Gelco cap call can turn into a full-system answer without a referral. Scheduling is straightforward: you tell us what’s happening, we book a visit, and we agree on a flat price and scope before we start. Nothing gets added mid-job. Call (855) 710-2744.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in North Hollywood
These are the Gelco failure modes we see most across North Hollywood, and each one has a local reason behind it.
- Galvanized cap bodies rusted through and screens gone. The dry Valley heat and long stretches of hot, dry weather chew through galvanized coatings faster than most homeowners expect. Once the screen fails, birds and debris drop straight into a 1920s flue that has no proper lining to catch anything.
- Multi-flue caps pulling loose at the mounting legs. Santa Ana wind downdrafts hammer the same caps from above, and on older masonry crowns the legs work loose over time. The gap that opens up is exactly where wind-driven smoke finds its way back into a living room.
- Top-mount dampers seized or warped. A Gelco top-mount damper on a fireplace used sporadically builds layered glazed creosote. The damper plates warp or bind, and the seal you need to stop cold-air downdraft is gone.
- Cap screens corroded and torn within a few years. Dry Valley conditions are hard on inexpensive screen mesh. A torn screen lets debris into clay-tile flues that are already narrow, and a blockage there backs smoke into the house.
- Caps that never matched the crown in the first place. On irregular old chimney tops, a cap installs badly from day one because nobody checked the flue dimensions and crown contours before ordering. It sits crooked, seals poorly, and fails early.
Gelco Service in North Hollywood: What Local Conditions Mean for Your Equipment
The NoHo arts and Valley Village fringe, particularly around the 91601 side, is packed with original 1920s Spanish Colonial Revival fireplaces. Many of these chimneys still wear their period hardware, and it has never been touched. That single fact changes what a Gelco cap replacement means here. Instead of dropping a modern multi-flue cap onto a clean square flue top, we’re often retrofitting one onto an irregular, 90-year-old masonry crown with uneven contours and a flue count that doesn’t line up with anything standard. Getting the mounting legs to seat, sealing the base against a crown that’s already cracked and settled, and sizing the cap to the real flue openings takes more than pulling a part number. It takes a look at the actual crown first. That’s the step a generic cap install skips, and it’s the step that decides whether the cap stays put through the next round of Santa Ana winds.
Gelco Models & Products We Service in North Hollywood
We service the Gelco chimney components you’re likely to have on a North Hollywood home: Gelco Multi-Flue Chimney Caps in stainless steel for chimneys with several flues under one cover, Gelco Single-Flue Caps in stainless and galvanized, the Gelco Top-Mount Damper series, and Gelco fireplace accessories such as grates, screens, and glass doors. When we replace a cap or damper, we match it with OEM or genuine-equivalent stainless components sized to your flue count and dimensions. No substituting a generic cover that fits poorly. If the frame is sound and only a screen or gasket has failed, we repair it. If the body or mounting legs have failed, replacing it is the honest call. We’ll tell you which one you’re looking at, with the part in front of you.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in North Hollywood
Every job is priced by a written estimate after we’ve seen the chimney. Here’s what typical ranges look like for the work we do on Gelco components in North Hollywood:
- Chimney sweeping: typically $180 to $340
- Level 2 inspection with camera: typically $250 to $450
- Cap replacement, single-flue or multi-flue: typically $300 to $750 depending on flue count and crown condition
- Top-mount damper replacement: typically $400 to $900
- Screen or gasket repair on a sound Gelco frame: typically $90 to $220
What drives the number is the crown, not the part. An irregular 1920s crown that needs sealing and shimming takes more time than a flat top, and the flue count changes the cap itself. The estimate is free. Nothing gets added later. Call (855) 710-2744 for an exact quote.
Serving North Hollywood, CA – Our Local Coverage Area
We serve North Hollywood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in North Hollywood
Smoke backing up after Santa Ana winds almost always comes down to a cap that’s no longer doing its job, either a rusted-through Gelco cap with loose mounting legs or a seized top-mount damper that can’t seal. The same downdrafts that drive the winds push debris and smoke down older flues. We trace it with a Level 2 inspection before recommending anything. Call (855) 710-2744 for an exact quote – estimates are free.
Yes, a Gelco multi-flue cap can be fitted to an old Spanish Colonial chimney, but it takes on-site measurement of the flue openings and crown contours first, because those crowns are rarely square or level. A cap sized from the actual dimensions seats correctly; one ordered off a guess doesn’t. We measure before we order.
If the cap frame and mounting legs are sound, replacing just the screen is the right repair, and it’s the cheaper path. If the body is rusted or the legs have pulled loose, the whole cap comes off. We check the frame and tell you which situation you’re in. Call (855) 710-2744 for an exact quote – estimates are free.
Once a year is the general baseline for a fireplace in regular use, and more often if you burn frequently or notice glazed creosote. Sporadic cold-night burning, common in North Hollywood’s mild winters, can build uneven glaze that’s harder to clear than steady use. An inspection tells you what your flue actually needs. Call (855) 710-2744 for an exact quote – estimates are free.
A Gelco top-mount damper can work on an unlined 1920s flue, but the unlined state has to be addressed first, because the damper only solves the downdraft and seal problem, not the missing lining. We inspect the flue with a camera and show you what’s there. Call (855) 710-2744 for an exact quote – estimates are free.
Service Areas Near North Hollywood
We serve Gelco chimney work throughout North Hollywood and the surrounding Valley communities, including North Hollywood itself, plus Burbank, Sunland, Panorama City, and the Valley Village area. If you’re on the NoHo side of the Valley and you’ve got a Gelco cap or damper question, we cover that ground. Valley Village and Sun Valley sit right in our service area too.
Book Your Gelco Service in North Hollywood Today
If your Gelco cap is rusted, pulled loose, or your damper won’t seal, we can look at it and give you a straight answer with the part in front of you. Call (855) 710-2744. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written estimate sets the final price.
Written by the team at Chimney Sweep Sun Valley.