Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Tujunga
If you live in Tujunga, your chimney works harder than most. The canyon winds, the dry summers, and the debris that still moves down from the burn scars above town all put pressure on the two parts of your chimney that face the weather head-on: the cap and the crown. Those are exactly the parts we build, replace, and repair. We know the hillside streets from Foothill Boulevard up into the ranch and cabin properties tucked along the ridges, and we know how a tight, steep-pitched roofline changes the way a cap has to sit. Call (855) 710-2744 for a free estimate. We answer 24/7.

Why Tujunga Homeowners Call Chimney Sweep Sun Valley for Chimney Cap & Crown
Tujunga is a community of larger, older properties where a single house might run two or three fireplaces off one masonry stack. That’s the kind of chimney work we do. We’re a dedicated chimney and fireplace specialist, not a general handyman outfit that added a brush to its truck. Our technicians have up to 13 years of experience, and they handle the whole system from the firebox to the crown.
We work with the same materials professional chimney engineers specify. Gelco and Famco caps, Copperfield and Olympia Chimney components, DuraFlex liners and HeatShield resurfacing. Nothing on the shelf at a hardware store matches that grade of material, and it matters more on a hillside property exposed to canyon wind.
We know the ground here. Tujunga’s streets climb, the roofs pitch steeply, and access is often tight. That’s not a problem we discover on arrival. It’s part of how we plan a cap or crown job in Tujunga before we book it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Tujunga
Every cap and crown job starts with the same question: what is this chimney actually up against? On a Tujunga hillside, that answer is wind, wildlife, and debris from the canyons above. Here’s how we handle the work, and where our chimney cap & crown team fits into the bigger picture of your chimney’s health.
Cap Installation
A new cap is the first line of defense. We size it to the actual footprint of your flue, not a one-size approximation, then set it so the mesh handles both wind-driven debris and the raccoons and birds that treat an open flue as an invitation. On Tujunga’s exposed lots, a properly fitted cap also cuts down the downdraft smoke that older ranch homes get when canyon wind pushes down the stack.
Multi-Flue Cap
This is the service Tujunga properties call for most. A house with two or three flues on one stack often has one cap missing or rusted through while the others still look fine, and that single gap is enough to let animals nest in a secondary flue and send smoke back into the living room. We measure the whole footprint and build one cap that covers every flue cleanly.
Crown Repair
The crown is the concrete or mortar cap at the very top of the masonry, and it’s what keeps rain out of the flue structure. Original crowns on mid-century Tujunga chimneys crack and spall as thermal cycling and Santa Ana winds work on them year after year. We repair the crown and re-establish the slope that sheds water away from the stack, so the masonry stays dry instead of soaking the firebox.
Crown Coating
When a crown is weathered but still structurally sound, a coating is often the smarter move than a rebuild. We prep the surface and apply a flexible coating that seals hairline cracks and gives the crown a fresh weather face. It’s the repair-rather-than-replace option, and on a Tujunga chimney with a steep roof pitch, it saves you the added cost of setting up for a full crown pour.
Trusted Brands We Service in Tujunga
We install Gelco and Famco caps because they’re purpose-built to keep water, debris, and animals out of the flue, not adapted from something else. For stack components we source from Copperfield and Olympia Chimney, two of the most recognized professional supply houses in the trade. We don’t claim to stock parts on a truck or keep a local warehouse; we specify the right component and get it to your Tujunga job. When a liner is involved, DuraFlex flexible liner systems and HeatShield ceramic resurfacing are the professional-grade options we work with, and HeatShield lets us restore a damaged flue interior without a full relining when the structure allows it.
Common Chimney Cap & Crown Problems We See in Tujunga Homes
Here’s what actually goes wrong on Tujunga stacks, and why the fix is usually about the whole chimney rather than one part.

- Missing or rusted multi-flue caps. On a property with several flues, one cap often fails while the rest hold up, and raccoons and birds move straight into the secondary flues. The result is blocked draft and smoke pushed back into the house.
- Cracked and spalling crowns on mid-century masonry. Thermal cycling through hot summers and gusty Santa Ana winds opens cracks in the original crown, and water then soaks down into the firebox and flue liner.
- Post-Station Fire ash and soot accumulation. Ash and soot from the burn scars above town settle on caps and crowns, and wind-driven debris clogs mesh screens and works at the flashing. That leads to leaks and draft problems that look like cap failures but start with debris.
- Downdraft smoke in older ranch homes. Canyon wind patterns push smoke back down the stack on houses that were never fitted with a properly sized cap. A cap sized for the wind exposure here usually solves it.
The Local Picture: Why Cap and Crown Work Is Different in Tujunga
Tujunga’s hillside ranch and cabin homes often sit on steep-pitched roofs with tight access, and after the Station Fire the canyon winds that run through the foothills began downdrafting smoke into houses that never had the problem before. That makes a properly fitted multi-flue cap and a sound crown more critical here than in the flatter valley cities nearby. Heat and dry summers, gusty Santa Ana winds, and winter canyon winds combine to give chimneys here heavy seasonal use and a steady supply of wind-driven debris. Creosote builds faster on a chimney that sees real firewood use, and clean flues matter more than usual when fire risk is a live concern in the canyons. This is why an annual inspection on a multi-fireplace Tujunga home is a practical routine, not an upsell.
See the difference
Before
After
Before
After
Before
AfterHow a Typical Cap and Crown Job Goes in Tujunga
In Tujunga’s mid-century ranch homes, a common cap and crown failure starts with a raccoon or bird nest in an uncapped flue, which blocks draft and lets wind-driven debris from the burn areas collect on the smoke chamber. The usual fix is to remove the nest, inspect the flue liner for damage, and install a custom or multi-flue cap sized to the chimney’s footprint and wind exposure. If the crown is spalling or cracked, a crown coating or repair restores the seal before winter canyon winds drive rain into the masonry. Nothing gets recommended without camera evidence you can see for yourself, and if part of the work can safely wait, we’ll tell you that too.
Pricing for Chimney Cap & Crown in Tujunga, CA
Prices here reflect what the work actually involves on a Tujunga hillside: roof access, stack height, and how many flues a single cap has to cover. A typical single-flue cap installation in Tujunga runs $275 – $550. A multi-flue cap for a two- or three-flue stack usually runs $450 – $900, depending on footprint and custom sizing. Crown repair typically runs $350 – $800, and a crown coating is generally $300 – $650. Custom caps for an odd-shaped architectural chimney land higher, often $700 – $1,200. These are estimated ranges for the Tujunga market; the written estimate sets the final price. The estimate itself is free.
We Also Serve Cities Near Tujunga
We handle cap and crown work across the foothills and the valley floor: La Crescenta-Montrose, Sunland, Burbank, and Sun Valley. If you’re in one of those and need the same multi-flue or crown work, the process is the same. We serve Tujunga and the surrounding communities with the same materials and the same camera-verified approach.
Serving Tujunga, CA – Our Local Coverage Area
We serve Tujunga and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Tujunga
The cap is probably the wrong size or shape for the wind exposure on your lot. Canyon winds here push down the stack, and a cap that doesn’t match your flue footprint or sit high enough can’t stop it. A custom or multi-flue cap sized to the chimney usually fixes downdraft smoke. Call (855) 710-2744 for an exact quote; estimates are free.
Once a year is the right rhythm for a Tujunga home with more than one fireplace. Multi-flue stacks have more places for a cap to fail or an animal to nest, and debris from the burn areas moves all year. An annual look catches a rusted cap or a hairline crown crack before it soaks the masonry. Call (855) 710-2744 to book an inspection.
A custom or multi-flue cap built to the chimney’s actual footprint works best here. That means a cap with sturdy mesh sized for raccoons and birds, set at the right height for the downdraft pattern on your hillside lot. Gelco and Famco caps are what we install for that job. Call (855) 710-2744 for an exact quote; estimates are free.
In most cases, yes. A cracked or spalling crown that’s still structurally sound can be repaired or coated to restore the seal, which is far less work than a rebuild. If the crown has failed down into the masonry, that’s a different conversation, and we’ll show you the camera evidence before recommending anything. Call (855) 710-2744 for an exact quote.
It can, yes. Heavy creosote buildup means the flue needs attention first, and it’s the reason a sweep often comes before a cap job. Third-degree creosote is a fire hazard and a professional handles it; we won’t brush over it and move on. We’ll tell you plainly what the flue needs before cap or crown work. Call (855) 710-2744 for an exact quote; estimates are free.
Ready to Protect Your Tujunga Chimney?
Whether it’s one cap or a full multi-flue setup on a hillside ranch, the work starts with a look at what your chimney is actually facing. Call (855) 710-2744 for a free estimate. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Sun Valley.