Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Glendale
If you’re in Glendale and water is getting into your chimney, or you’ve spotted cracked mortar on the crown, you’re in the right place. We install, replace, and repair chimney caps and crowns across Glendale, from the tight hillside streets off Glenoaks to the older bungalow blocks near Chevy Chase Canyon. Our technicians have up to 13 years of experience, and we bring the same professional-trade materials Glendale fireplace owners actually need: Gelco and Famco caps, HeatShield ceramic repair, DuraFlex liners when a flue won’t pass a smoke test. We answer our phone and we book a real appointment. Call (855) 710-2744 for a free estimate.

Why Glendale Homeowners Call Chimney Sweep Sun Valley for Chimney Cap & Crown
We’re a chimney and fireplace specialist, not a home-services generalist that added a brush to the van. That matters in Glendale, where the housing is older and the chimney work is often structural. A cracked crown on a shared stack isn’t a cosmetic issue. It’s the reason water gets into the brick, the reason a flue fails a smoke test, and the reason a pre-1950 house won’t pass inspection before a burn. We handle the whole system from firebox to crown, in-house, no subcontractors for the core work.
What you’ll get from us: a flat-price sweep agreed before we book, a camera inspection with a photo report you can look at yourself, and a written recommendation that tells you plainly when work can safely wait. We don’t sell a relining you don’t need. If your flue is sound and your cap is just loose, we’ll tell you that and tighten the cap. Our technicians have up to 13 years of experience working on the kind of original clay-tile flues and exterior masonry chimneys common in Glendale. If you call, you’ll get a clear answer. We answer 24/7, fast dispatch from 7am to 7pm, and the local professional who does the work is licensed and insured as their state requires.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Glendale
Glendale’s older housing stock drives most of the cap and crown work we do here. The sub-services below are what we install and repair most often, and each one exists for a specific local failure. You can see the full lineup on our chimney cap & crown service page.
Cap Installation
A properly fitted cap keeps rain, debris, birds, and squirrels out of your flue. In Glendale’s foothill neighborhoods, where the Santa Ana winds push hard off the Verdugo and San Gabriel foothills, we install Gelco and Famco caps that are anchored to actually stay put, not the thin stamped covers that blow off after one wind event. On pre-1950 chimneys, we check the flue top before the cap goes on, because a cap over a damaged flue just hides the problem.
Cap Replacement
Loose, rusted, or missing caps are one of the most common things our technicians find in Glendale. After a windy stretch, a cap that wasn’t attached right can be sitting on the roof or gone entirely, and the flue is open to the weather. We replace caps on single-flue and multi-flue chimneys, and we size the replacement to the actual flue opening rather than reusing whatever was there. On shared stacks, this is where a lot of cross-contamination gets fixed.
Crown Repair
The crown is the concrete or mortar cap at the top of the chimney that sheds water away from the brick. When it cracks, water gets in, and in Glendale’s pre-1950s masonry that means spalling brick, loose mortar, and a stack that starts failing. We repair crowns that are cracked but structurally sound, and we rebuild crowns that are past repair. On hillside homes, cracked crowns also become a fire-code concern, because a broken crown can let embers into the flue lining.
Crown Coating
Not every crown needs to be torn out and rebuilt. If the crown is intact but showing hairline cracks and surface wear, a protective coating is the cost-conscious repair path. We use HeatShield ceramic repair where the structure allows it, restoring a worn surface without a full rebuild. Coating is a smart move before the fire season in Glendale, when dry heat and wind take the worst toll on older masonry.
Trusted Brands We Service in Glendale
We work with the professional-trade brands that chimney technicians specify, not what’s on the shelf at the hardware store. For Glendale cap and crown work, that means Gelco and Famco caps, Copperfield and Olympia Chimney components, HeatShield ceramic repair for crown and flue resurfacing, and DuraFlex flexible liner systems when a pre-1950 clay-tile flue needs relining before a cap can do its job. We don’t stock parts locally. We specify the right component for your chimney and get it in, which keeps turnaround fast and the work correct.
Common Chimney Cap & Crown Problems We See in Glendale Homes
Glendale’s mix of dense pre-1950s attached housing and hillside bungalows creates specific cap and crown failures you won’t see in newer subdivisions. These are the four we run into most:

- Cracked crown on a shared stack. Water gets into the brick, mortar starts spalling, and the shared stack starts failing from the top down. On attached Glendale properties, one cracked crown can compromise multiple flues at once.
- Missing or loose cap on a multi-flue chimney. This is the big one. When one flue’s cap is gone, a neighbor’s dryer exhaust or water heater can backdraft into another unit’s firebox. That cross-contamination rarely happens in detached suburban housing, but in Glendale’s dense blocks it’s a real risk.
- Original clay-tile flues in pre-1950 houses. Many Glendale bungalows still have the original unlined clay-tile flue, and after earthquake damage or decades of use these fail smoke tests. A cap can’t fix a failing flue, so relining comes first.
- Chimneys damaged in the Northridge quake and never re-inspected. Some 91208 hillside homes have tall, exposed chimneys that cracked in 1994 and were patched but never re-checked. Before any burn, they need a proper Level 2 inspection.
One more local reality: cross-contamination on shared stacks is a real hazard, and we don’t treat it lightly. The good news is that a correctly installed multi-flue cap with a spark arrestor, plus crown repair to seal the shared stack, usually solves it. That’s work we handle under one roof, from the firebox to the crown, because it isn’t a job for a generalist.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Glendale, CA
We price by the job, and the written estimate sets the final number. A typical cap installation in Glendale runs $250-$600, depending on flue size and whether it’s a single cap or a multi-flue setup. A stock cap replacement is usually $180-$400. Crown repair on a cracked but sound crown runs $350-$800, and crown rebuilding on a badly deteriorated stack runs $800-$1,800. Crown coating with HeatShield ceramic repair typically runs $300-$650. A custom multi-flue cap for a shared stack runs $600-$1,200, because it’s fabricated to fit the actual chimney rather than a one-size-fits-all cover. If a pre-1950 flue needs relining before a cap can go on, we’ll quote that separately after the camera inspection, and the report is yours to review. Ask about your chimney and we’ll give you a free estimate.
We Also Serve Cities Near Glendale
Glendale is home base for this work, but we also take cap and crown jobs in the surrounding area: Burbank, La Crescenta-Montrose, Toluca Lake, and Tujunga. The same older housing and foothill wind exposure show up throughout these communities. If you’re just outside the Glendale city line, call us and we’ll let you know if you’re in range. We’re glad to serve Glendale and the neighborhoods around it.
Serving Glendale, CA – Our Local Coverage Area
We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Glendale
Yes, a properly fitted cap with a secure seal can stop backdrafting, but only if the cap is installed correctly and the stack’s crown is intact. In shared masonry stacks, a missing or loose cap on one flue lets a neighbor’s dryer or water heater exhaust travel into another unit’s firebox. The fix is usually a custom multi-flue cap combined with crown repair to seal the shared stack. We’d inspect both flues to confirm. Call (855) 710-2744 for a free estimate.
Very likely, yes. Concrete fragments on the roof after a wind event usually come from a cracked or spalled crown, especially on the tall, exposed chimneys common on hillside homes in Glendale. The wind gets under a failing crown and breaks pieces loose. It’s worth a closer look before rain, because water follows those cracks straight into the brick. Call (855) 710-2744 and we’ll take a look and give you a written estimate.
Not always. A cap alone won’t fix a failing flue, so the flue has to pass a smoke test before we cap it. Many pre-1950 Glendale homes still have the original unlined clay-tile flue, and after earthquake damage or decades of use these fail the test and need relining before a cap. We start with a camera inspection and a photo report so you can see the flue condition yourself. Call (855) 710-2744 for a free estimate.
Because individual caps don’t seal a shared stack as a unit, and the gaps between them stay open to water, debris, and cross-contamination. A custom multi-flue cap covers the whole top of the chimney, with each flue getting its own outlet and a spark arrestor, so a neighbor’s exhaust stays out of your firebox. On Glendale’s dense pre-1950s housing, that single custom cap is often the cleanest fix. Call (855) 710-2744 to talk through the setup.
Yes, it’s a real risk here, because the foothill streets off Glenoaks and Chevy Chase sit in a high fire-severity zone where Santa Ana winds and dry brush can push embers toward homes. A missing or damaged spark arrestor lets hot embers leave the flue and land on a roof or in dry vegetation. We check the arrestor on every cap install and replace it when it’s gone or failed. Call (855) 710-2744 for a free estimate.
Contact Us
If your Glendale chimney needs a cap, a crown repair, or just a straight answer about what’s actually wrong up there, call (855) 710-2744. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We don’t recommend work without camera evidence you can see for yourself, and we’ll tell you plainly when a repair can safely wait. Estimates are free, and the written estimate sets the final price.
Written by the team at Chimney Sweep Sun Valley.