Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Sun Valley Homeowners
Most chimney problems announce themselves quietly. A faint creosote smell in July, a stain blooming on the ceiling near the flue, a damper that scrapes when you open it. By the time smoke backs into the room, the damage has usually been building for a while. An inspection finds those problems while they are still small and inexpensive to fix.
Our technicians have up to 13 years of experience reading flues, fireboxes, crowns, and caps, and we work with the same professional-trade materials chimney specialists specify rather than what sits on a hardware store shelf. We’re a dedicated chimney company, not a pressure-washing outfit that added sweeping to its menu. We answer 24/7 and offer fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 710-2744 to book your inspection.
Key Takeaways
- An inspection tells you what your flue actually needs; a sweep is only the starting point.
- We offer six inspection types, from a basic visual check to a full camera-and-video look inside the flue.
- Nothing gets recommended without evidence you can see for yourself.
- Estimates are free, and the written estimate sets the final price.
What Our Chimney Inspection Service Includes
Every inspection we perform falls into one of six categories, and the right one depends on what you’re trying to find out. Here’s what each covers, when it makes sense, and what we actually do.
Level 1 Inspection
A Level 1 inspection is a visual check of all readily accessible parts of your chimney and venting system: the firebox, damper, flue from the firebox up as far as we can see, the exterior of the chimney, the crown, and the cap. It’s the right call when your fireplace is working normally, you haven’t changed anything about the system, and you just want confirmation that it’s safe to burn. We perform this check as part of every routine sweep, and we document what we see so you have a record.
Level 2 Inspection
A Level 2 inspection goes further: it includes everything in a Level 1 plus a look at accessible portions of the attic, crawl space, and other areas where the chimney passes through the structure, along with video scanning of the flue interior. You need this level after a chimney fire, after any change to the system (a new appliance, a fuel switch, a relining), when you’re buying or selling a home, or after an earthquake or major storm. We use this inspection to catch hidden damage that a visual check alone would miss.
Level 3 Inspection
A Level 3 inspection is the most involved and is only performed when a specific problem has already been identified and access to a concealed area is required to diagnose it. That might mean opening a wall, removing part of the chimney chase, or accessing a section of flue that can’t be reached any other way. We don’t recommend a Level 3 casually. When we do, we explain exactly what we’re looking for and why the lower levels aren’t enough to answer the question.
Camera Inspection
A camera inspection sends a video camera down the flue so we can see the liner’s full interior: cracks, gaps, missing mortar joints, offsets, and any buildup we can’t reach with a brush. It’s the only way to truly assess a flue liner’s condition, and it’s the basis for every recommendation we make about relining or resurfacing. We include the video and still images in a photo report so you can see what we saw.
Flue Inspection
A flue inspection focuses specifically on the flue itself, separate from the firebox or exterior structure. We check for correct sizing, proper lining, blockages (nests, debris, collapsed liner sections), and the condition of joints and seams throughout the run. If your appliance has been drafting poorly or you’ve noticed smoke spillage, the flue is usually where the answer lies.
Real Estate Inspection
A real estate inspection is a Level 2 performed as part of a home sale, giving the buyer and seller a clear, documented picture of the chimney’s condition before closing. We provide a written report with photographs that a buyer, seller, or real estate agent can rely on to negotiate or plan repairs. If you’re selling a Sun Valley home, getting this done early avoids surprises in escrow.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Inspection
Chimney components from different manufacturers wear in different ways, and we’ve inspected enough systems to know where each one tends to fail first. When we look at DuraFlex flexible liner systems, we know the seams and the connection points at the top plate and appliance collar are where problems show up, so those get a close look. HeatShield ceramic resurfacing has its own pattern: we check the bond between the ceramic layer and the original flue wall, since a partial delamination changes what repair options make sense.
With Gelco and Famco caps, we look at how the cap is seated, whether the mesh has corroded or been pushed in by weather, and whether the cap is actually sized correctly for the flue it’s covering. Olympia Chimney and Copperfield components turn up regularly in the systems we inspect, and we know the common failure points on their fittings and terminations. Whether your chimney has DuraFlex, HeatShield, Gelco, Famco, Olympia Chimney, Copperfield, or any other make, we can help.
If you’re not sure what’s in your chimney, that’s normal. A camera inspection tells us exactly what’s there and how it’s holding up. For a broader look at how we handle the whole system, see our chimney sweep services in Sun Valley.
Signs You Need Chimney Inspection Right Now
Some of these are obvious. Others are easy to write off as nothing. Any one of them is worth a call.
- Smoke backing into the room. Smoke that curls into the room instead of going up the flue usually means a blockage, a sizing problem, or negative pressure in the house. It’s a sign the flue isn’t drafting the way it should, and burning in that condition puts combustion gases where you don’t want them.
- A strong creosote smell, especially in warm weather. Creosote that has built up in the flue can smell sharp and acrid when the weather warms. That smell is a signal there’s enough buildup to warrant a look, and heavy creosote is the fuel a chimney fire needs.
- Water stains or a musty smell near the chimney. Stains on the ceiling, walls, or chimney breast usually point to a failed crown, cap, or flashing. Water intrusion is the most common path to expensive chimney damage, and it rarely fixes itself.
- Visible cracking, spalling, or loose mortar on the exterior. Cracked brick, crumbling mortar joints, or pieces of the chimney face flaking off mean the structure is taking on water. An inspection tells us whether the damage is cosmetic or structural.
- A chimney fire, earthquake, or major storm since your last inspection. Even a small chimney fire can crack a liner without obvious signs from the firebox. After any of these events, a Level 2 inspection is the right response.
Our Chimney Inspection Process – Step by Step
- 1
We start with a conversation. Before anyone touches the chimney, we ask how you use the fireplace, whether you’ve noticed smoke, smells, or stains, and when it was last serviced. That context tells us which inspection level makes sense and where to concentrate our attention.
- 2
We protect your home. Drop cloths go down around the work area, and we set up containment so soot and debris stay in the chimney, not on your floor. It’s a small step, but it’s the difference between a professional job and a mess.
- 3
We inspect the accessible system. Firebox, damper, flue from the firebox up, the exterior, the crown, the cap, and (for a Level 2) accessible attic and crawl space areas. We photograph everything and note what we find as we go.
- 4
We run the camera. A video scan of the flue interior gives us a full picture of the liner’s condition, including sections no brush or flashlight can reach. We record the footage and pull still images for your report.
- 5
We walk you through the findings. We show you the photos and video, explain what we see in plain terms, and tell you what (if anything) needs attention. If work can safely wait, we say so. You get a written estimate before anything else happens.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Inspection Cost in Sun Valley?
Chimney inspection in Sun Valley typically runs $99 – $250 for a Level 1, $150 – $400 for a Level 2, and $500 and up for a Level 3 when concealed access is required. A standalone camera inspection usually falls in the $150 – $350 range. Real estate inspections sit near the top of the Level 2 range because they include the full written report a transaction requires. These are typical ranges, not fixed prices; the written estimate sets the final number.
What moves the price: the inspection level, whether the flue is straight or has offsets that slow the camera run, how accessible the attic and crawl space are, and whether the chimney has multiple flues. A straightforward single-flue home is on the lower end. A masonry chimney with multiple flues and tight attic access is on the higher end.
How to avoid overpaying: ask exactly which level you’re getting and why, and insist on seeing the camera footage and photos yourself. Nothing should be recommended without evidence you can review. If a sweep is due anyway, bundling it with the inspection usually costs less than booking the two separately. Estimates are free, and we explain what’s included before we start.
Chimney Inspection Near Sun Valley – Our Service Area
We inspect chimneys throughout Sun Valley and the surrounding areas, including North Hollywood, Burbank, Sunland, Tujunga, Valley Village, Panorama City, Toluca Lake, Studio City, Van Nuys, San Fernando, and Sherman Oaks. If you’re outside these areas, call and we’ll confirm coverage. For our neighboring service, see the chimney inspection in North Hollywood page, and for the Burbank area, see our chimney inspection in Burbank.
Serving Sun Valley, CA – Our Local Coverage Area
We serve Sun Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Inspection in Sun Valley
A chimney inspection is a professional evaluation of your chimney’s condition, covering the firebox, flue, crown, cap, and surrounding structure. It’s more than a cleaning: it tells you whether the flue is safe to use and whether anything needs repair. We offer six types, from a basic Level 1 visual check to a full Level 3 with concealed access. Call (855) 710-2744 for an exact quote.
A Level 1 inspection usually takes 30 to 45 minutes, and a Level 2 with camera scanning typically runs 60 to 90 minutes. Level 3 inspections depend on how much access is needed and can take several hours. We’ll tell you the expected time when you book. Call (855) 710-2744 for an exact quote.
A typical Level 1 inspection in Sun Valley runs $99 – $250, a Level 2 runs $150 – $400, and a Level 3 starts around $500. Camera-only inspections usually fall between $150 and $350. Prices vary with access and flue configuration, and the written estimate sets the final price. Call (855) 710-2744 for an exact quote – estimates are free.
Yes. We inspect and work with HeatShield ceramic resurfacing and DuraFlex flexible liner systems, along with Gelco, Famco, Olympia Chimney, and Copperfield components. We know where each type tends to wear and what to look for. Call (855) 710-2744 for an exact quote.
We offer same-day service when scheduling allows. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (855) 710-2744 for an exact quote.
We stand behind the inspections we perform and will address any concern about our findings directly. Our recommendations are backed by camera footage and photos you can review for yourself, so you’re never asked to take our word for it. Call (855) 710-2744 for an exact quote.
Clear the hearth and the area in front of the fireplace, and make sure we can reach the attic and crawl space access points if a Level 2 is scheduled. Don’t burn for at least 24 hours before the appointment so the flue is cool and safe to inspect. If you have prior inspection reports or records, have them handy. Call (855) 710-2744 for an exact quote.
Schedule Your Chimney Inspection Service in Sun Valley Today
Book a chimney inspection and you’ll know exactly what your flue needs, backed by footage and photos instead of guesswork. If something can wait, we’ll tell you. If it can’t, you’ll have a written estimate before any work begins. Call (855) 710-2744 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Sun Valley.