Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Sun Valley Homeowners
Masonry in Sun Valley takes a beating from dry heat, strong valley winds, and the smoke of a working fireplace season after season. When mortar joints crumble, bricks spall, or flashing pulls away from the roofline, water finds its way inside the chimney structure and the damage grows quietly until a small repair becomes a large one. Our technicians have up to 13 years of experience diagnosing exactly that kind of failure, and we handle the repair from the firebox to the crown using materials professional chimney crews specify, not what sits on a hardware store shelf. If you’ve spotted loose bricks or staining near the flue, call (855) 710-2744. We answer 24/7, and we book same-day work when the schedule allows.
What Our Chimney Repair Service Includes
Chimney repair covers everything that keeps the structure sound and the flue safe: the mortar and brick that make up the stack, the waterproofing that protects the masonry, the flashing where the chimney meets the roof, and the liner that carries smoke and gases out of the house. We work through each of these as its own trade skill, because a repointing job and a flashing repair fail in very different ways. Below is what each repair involves and when a Sun Valley homeowner usually needs it.
Mortar Repointing
Repointing is the process of grinding out failed mortar joints and packing them with fresh mortar matched to the original brick. You need it when joints have eroded into deep grooves, gone crumbly, or started dropping grit onto the roof or the hearth. We rake the joints to the correct depth so the new mortar bonds properly rather than sitting on top of loose material, then tool the joints to shed water the way the original masonry was built to.
Spalling Brick Repair
Spalling is when the face of a brick flakes off or crumbles, usually after moisture gets inside the brick and works it loose from within. You’ll notice brick faces peeling away, piles of red grit at the chimney base, or bricks that look pitted and rough compared with the rest of the stack. We replace the damaged bricks with matching units and correct the moisture problem that caused the spalling, since swapping bricks without fixing the source just repeats the damage.
Chimney Waterproofing
Waterproofing is a breathable sealer applied to the exterior masonry that stops liquid water from soaking in while still letting moisture vapor escape. It matters in Sun Valley because the dry season bakes the brick and the wet season drives rain against it, and unsealed masonry absorbs that water like a sponge. We apply a vapor-permeable treatment after any repointing or brick work has cured, so the sealer protects the repair instead of trapping moisture behind it.
Flashing Repair
Flashing is the metal layer that seals the joint between the chimney and the roof, diverting rain away from that intersection. When flashing rusts, lifts, or loses its seal, water runs straight down the chimney chase and shows up as ceiling stains or rot in the attic framing far from the chimney itself. We reset or replace the flashing and re-seal the counterflashing so the roof-to-chimney joint sheds water the way it should.
Chimney Rebuilding
Rebuilding is for chimneys where damage has gone past surface repair, usually the top few courses where the crown, flue tile, and upper brick have deteriorated together. You need it when the stack is leaning, bricks are missing, or the chimney has pulled away from the house. We rebuild from a sound base upward, matching brick and mortar, and we can rebuild just the section above the roofline when the lower structure is still solid.
Tuckpointing
Tuckpointing is a finer form of mortar work where a thin, often contrasting mortar is worked into the joint for a clean, finished look while reinforcing the seal. Homeowners choose it when the masonry is structurally sound but the joints look worn or uneven and they want the chimney to match the character of the house. We match the mortar color and profile to the existing work so the repair blends in rather than standing out as a patch.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Repair
We work with the same professional-trade materials chimney crews specify rather than the retail lines sold at hardware stores. HeatShield is a ceramic resurfacing system we use to restore a deteriorated flue liner without a full relining, which is often the cost-conscious path when the structure allows it. DuraFlex flexible liner systems are the professional standard for relining older or offset flues, and we install them instead of cheaper one-size-fits-all alternatives. Gelco and Famco chimney caps are purpose-built covers we fit to keep water, debris, and animals out of the flue, and components from Olympia Chimney and Copperfield come from two of the most recognized professional chimney supply distributors in the trade.
Whether your chimney needs a HeatShield resurfacing, a DuraFlex reline, a Gelco cap, or a Famco cover, the material should match the condition of your flue, not the other way around. We assess the liner and the cap in the same visit so the repair you get actually solves the problem you have. If you’re not sure what’s on your chimney now, we’ll identify it and explain the options in plain terms before any work is booked. Whether you have a Gelco, a Famco, or any other make, we can help.
Signs You Need Chimney Repair Right Now
- Crumbling or missing mortar joints. If you can push a screwdriver into the mortar between bricks, it has lost its strength and the stack is taking on water. Loose joints also let the chimney flex, which cracks the flue tile inside.
- Brick faces flaking or grit at the base. Spalling brick sheds red grit onto the roof or the ground, and each flake thins the brick wall. Catching it early usually means replacing a few bricks instead of rebuilding the top of the stack.
- Water stains on the ceiling or chimney chase. Brown rings or damp patches near the chimney usually point to failed flashing or a cracked crown. Water that reaches interior framing causes rot that spreads well beyond the chimney itself.
- A white, chalky powder on the masonry. That powdery bloom is called efflorescence, and it means moisture is moving through the brick and evaporating on the surface. It’s a signal the chimney isn’t shedding water and needs waterproofing or a flashing repair.
- A leaning stack or gaps where the chimney meets the house. Movement in the chimney is a structural signal, not a cosmetic one. A gap at the roofline lets water and pests in, and a leaning stack needs to be evaluated before it gets worse.
Our Chimney Repair Process – Step by Step
- 1
We start with an inspection. Before anyone quotes a repair, we look at the full system: the firebox, the flue liner, the crown, the flashing, and the exterior masonry. A camera inspection lets us see inside the flue and share what we find with you, so the recommendation is based on what’s actually there.
- 2
We explain what we found and what it needs. You get a plain explanation of the damage and the repair options, along with photos of the problem area. If a repair can safely wait, we tell you that, and if a HeatShield resurfacing can restore the liner without a full reline, we’ll show you why it’s the right call for your flue.
- 3
You get a written estimate before we start. The estimate covers the scope, the materials, and the price, with no surprises added later. The written estimate is what sets the final price, so you know what you’re agreeing to before any work begins.
- 4
We do the repair with professional-grade materials. Repointing, spalling brick, flashing, waterproofing, and rebuilding are all handled by our team, with DuraFlex, HeatShield, Gelco, Famco, Olympia Chimney, and Copperfield components specified to fit the job. A sweep and camera check follow the repair so we can confirm the flue is sound before we leave.
- 5
We walk the finished work with you. You see the repair, the before-and-after photos, and any notes for keeping the chimney in good shape. If anything needs a follow-up, we schedule it then, and the estimate stays free.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Sun Valley?
Chimney repair in Sun Valley is priced per job by a written estimate, and the range depends on what’s being repaired and how far the damage has gone. A typical repointing job runs roughly $350 to $900 depending on how many joints need work and how high the chimney is. Spalling brick repair or tuckpointing usually falls in the $400 to $1,200 range, while waterproofing is often the least expensive repair at around $250 to $600. Flashing repair runs about $300 to $700. Rebuilding the top of a chimney is the largest job, typically $2,000 to $6,000 or more when the full stack needs to come down and go back up. HeatShield liner resurfacing lands in a middle range, often several hundred to a couple thousand dollars depending on flue size, and it’s typically less than a full reline.
Several things move the price: the height and pitch of the roof, how much of the chimney is accessible, whether the damage is limited to the surface or has reached the structure, and whether the repair needs a permit. You avoid overpaying by getting the diagnosis before the quote. We inspect first, show you the photos, and recommend only the work the evidence supports. If a repair can safely wait until next season, we say so. Your free estimate includes the inspection findings, the scope, and the price in writing, and that written estimate sets the final cost.
Chimney Repair Near Sun Valley – Our Service Area
We provide chimney repair to homeowners across the east San Fernando Valley and the surrounding foothills, including Sun Valley, Sunland, Tujunga, North Hollywood, Burbank, Valley Village, Panorama City, Toluca Lake, Studio City, Van Nuys, San Fernando, and Sherman Oaks. We book work in these nearby cities with the same inspection-first process and the same written estimate. Reach out and we’ll schedule the visit. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Sun Valley, CA – Our Local Coverage Area
We serve Sun Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Repair in Sun Valley
Chimney repair is the work that restores the masonry, flashing, liner, and crown of a chimney so the structure stays sound and the flue carries smoke and gases safely. It covers everything from mortar repointing and spalling brick replacement to flashing repair, waterproofing, and rebuilding the top of the stack. It’s different from a sweep, which removes creosote, though our Chimney Sweep Sun Valley service usually starts with the inspection that finds the repair need. Call (855) 710-2744 for an exact quote; estimates are free.
Most repair jobs take between a few hours and two days, depending on the scope. Repointing, spalling brick replacement, flashing repair, and waterproofing are usually single-day work, while a rebuild of the top of the stack can run longer because the mortar needs time to cure. We tell you the expected timeline in the written estimate so you can plan around it. Call (855) 710-2744 to schedule.
Chimney repair in Sun Valley typically runs from around $250 for waterproofing up to $6,000 or more for a full rebuild of the top of the stack, with most repairs landing between $350 and $1,200. The range depends on the repair type, roof height, and how far the damage has gone. The written estimate sets the final price, and the estimate is free. Call (855) 710-2744 for an exact quote; estimates are free.
Yes. We install and service HeatShield ceramic resurfacing and DuraFlex flexible liner systems, along with Gelco, Famco, Olympia Chimney, and Copperfield components. If your liner needs resurfacing, HeatShield lets us restore it without a full relining when the structure allows. We assess the flue first and show you what we found. Call (855) 710-2744 for an estimate.
We book same-day work when the schedule allows, and we dispatch from 7am to 7pm, Sunday through Friday. We answer the phone 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Some repairs need a full assessment first, so the estimate visit may come before the repair itself. Call (855) 710-2744 to get on the schedule.
We stand behind our work, and we’ll discuss the coverage terms for your specific repair in the written estimate before any work begins. Our technicians have up to 13 years of experience, and we use the professional-grade materials the trade specifies, from HeatShield and DuraFlex to Gelco, Famco, Olympia Chimney, and Copperfield. If something isn’t right after the work, contact us and we’ll take a look. Call (855) 710-2744 for the details.
Clear access to the fireplace and the roof area is the main thing, along with moving any furniture or decor away from the hearth. If you have previous inspection reports or photos of the damage, have them ready so we can compare. We bring our own tools and drop cloths and handle the camera inspection during the visit. Call (855) 710-2744 to book your appointment.
Schedule Your Chimney Repair Service in Sun Valley Today
Don’t let a small repair turn into a structural job. Our team inspects first, shows you the evidence, and repairs only what the chimney actually needs, with chimney repair and chimney repair work booked across the valley. Call (855) 710-2744 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Sun Valley.