Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Burbank
If your chimney is leaking, shedding brick, or showing rust streaks around the cap, you’re in the right place. We handle chimney repair in Burbank from the firebox to the crown, and we know the specific ways this town’s wind, sun, and older bungalows wear a chimney down. Our technicians have up to 13 years of experience reading exactly those failure points. Getting a written estimate is free, and a flat price is agreed before any booking. Call (855) 710-2744. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Burbank Homeowners Call Chimney Sweep Sun Valley for Chimney Repair
Burbank sits in a basin where Santa Ana winds drive abrasive dust and palm-frond debris straight against chimney tops, and that changes the repair list you actually need. Galvanised caps and flashing tend to give out before the masonry does, which is the opposite of what most homeowners expect. Knowing that order of failure is most of the job, and it’s why we push a camera inspection and a photo report on every visit, free with the sweep and included in the written estimate.
We’re a dedicated chimney specialist, not a pressure-washing company that added sweeping to its menu. Everything from sweeping and inspection to cap and crown work, fireplace repair, and structural chimney repair stays with us, with no referrals for the core work. We also stay city neutral in how we describe ourselves, so what you get is the truth about your Burbank chimney and nothing padded.
Response to Burbank is quick, and the urgency here is seasonal. The useful deadline is before burning season and before the next round of wind. If you call outside dispatch hours, the call is booked into the next opening, Sunday through Friday, 7am to 7pm. Local pros are licensed and insured as their state requires, and the estimate is free and per job.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Burbank
These are the repair lines we run most often on Burbank chimneys. If you want the full scope in one place, our chimney repair team covers sweeping, inspection, cap and crown, fireplace repair, and structure.
Chimney Waterproofing
Masonry in Burbank takes a beating from dry sun and occasional hard rain, and brick that stays damp through a wet week is brick that starts to spall. We waterproof the stack with a breathable treatment so moisture can escape rather than get trapped behind a seal. This is the cheapest way to slow the deterioration we see on brick around Burbank’s older bungalows, and it’s usually done at the same visit as repointing.
Flashing Repair
Flashing is where the chimney meets the roof, and it’s one of the first components to fail against Santa Ana grit, long before the brick shows obvious wear. Loose, pitted, or lifted flashing lets water track down the flue and rust the damper from the inside. We reseal and replace flashing to suit the roof, then confirm with photos that the water path is cut off.
Mortar Repointing
Decades of thermal cycling open hairline joints in the mortar bed, and once water gets in, the joint widens through the winter. Repointing replaces that deteriorated mortar with fresh joints ground out and packed properly, not smeared over the surface. We work the whole stack, including the crown, so the repair holds at the top where wind does the most work.
Spalling Brick Repair
Spalling is brick faces popping off in flakes and chunks, usually after moisture works in behind from a failing crown or flashing. On many Burbank homes the spalling sits just below the crown, which tells you the water is coming from above. We replace the damaged brick during the same repair and fix the source, so the new brick doesn’t go the same way.
Trusted Brands We Service in Burbank
We specify the same professional-trade materials chimney professionals build with, not what’s on the shelf at the hardware store. That means DuraFlex flexible liner systems for relining older or offset flues, HeatShield ceramic resurfacing when a deteriorated flue can be restored rather than fully relined, and Gelco or Olympia Chimney caps and components. We don’t claim to stock parts locally. When a component is specified, we order it and schedule the install, and the estimate tells you what’s coming.

See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Burbank Homes
The order of failure in Burbank is fairly consistent. Caps and flashing go first, crowns crack next, and the brick follows. Catching it in that order keeps the repair small.
- Galvanised caps and flashing eaten by wind-driven grit. Decades of abrasive Santa Ana dust pit the metal and loosen the flashing, leaving rust streaks and water creeping around the flue. A stainless cap and resealed flashing stop it.
- Hairline crown cracks from thermal cycling and minor seismic movement. The crown takes the most sun and wind, and small cracks let water in below. Freeze-thaw is rare here but still damaging when it happens, and the brick underneath spalls.
- Palm-frond and bird debris clogging the flue. Hillside properties near the Verdugo Mountains catch palm fronds and nesting birds at the canyon edges. Downdrafts follow, and occasional creosote dustings show up inside the home after a wind event.
- Clay-tile flues in 1920s to 1950s bungalows. Original clay liners in these homes can be cracked or offset, so an inspection has to look at the liner, not just the firebox. That’s where a camera report earns its keep.
Pricing for Chimney Repair in Burbank, CA
Chimney repair in Burbank typically runs $350 to $650 for repointing and flashing work, $500 to $1,200 for crown rebuilding and waterproofing together, $900 to $2,400 for spalling brick replacement depending on how much brick is affected, and $2,500 to $5,500 for a partial rebuild. These are typical estimates for the area, not final numbers. The written estimate sets the final price. What moves it: how much brick is damaged, whether the crown needs rebuilding versus patching, and how high up the work sits. Inspection and a photo report are included, and the estimate is free. Call (855) 710-2744 for an exact quote.
We Also Serve Cities Near Burbank
Burbank isn’t the only place we cover. We also serve Burbank neighbors in Toluca Lake, Glendale, North Hollywood, and Sun Valley, along with the rest of the surrounding hills. If you’re just over the line in one of those, the same repair lines and the same written estimate apply. Call and tell us where you are.
Serving Burbank, CA – Our Local Coverage Area
We serve Burbank and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Burbank
Once a year, and every year matters more on an original 1920s chimney than on a newer one. Clay-tile flues crack and offset over decades, and caps and flashing wear faster in Burbank’s wind. An annual inspection catches those before the brick starts spalling. Call (855) 710-2744 for an exact quote, with estimates free.
A stainless steel cap holds up best, and it outlasts a galvanised one by a wide margin in this town. Galvanised caps pit and loosen under wind-driven grit, which is why we specify stainless along with Gelco or Olympia Chimney components. The cap also keeps palm fronds and birds out of the flue. Call (855) 710-2744 for an exact quote.
Yes, in most cases. Spalling at the crown usually traces back to a cracked crown or failing flashing, so we fix the source and replace only the damaged brick. A partial rebuild is needed only when the damage runs down the stack. Camera inspection tells you which before anyone commits. Call (855) 710-2744.
A downdraft is usually the cause: wind hits the stack, pressure drops inside, and stale creosote odor pushes into the room. Debris clogging the flue makes it worse, and Burbank’s hillside properties near the Verdugos catch palm fronds and bird nests at the top. A sweep and inspection confirm whether it’s debris or buildup. Call (855) 710-2744.
First-degree creosote is a light, flaky soot that brushes out. Third-degree is a glazed, hardened layer that needs mechanical removal and signals a real fire hazard if left. Burbank fireplaces see sporadic winter use, so buildup is often thin but uneven, and a glaze can hide in the flue after a short, hot run of fires. Inspection tells you which you have. Call (855) 710-2744.
If your Burbank chimney has rust streaks, cracked brick, or a smell after the wind, that’s the starting point for a camera inspection and a written estimate. Call (855) 710-2744. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Nothing gets recommended without camera evidence you can see for yourself, and we’ll tell you plainly when a repair can safely wait.
Written by the team at Chimney Sweep Sun Valley.